Differences

This shows you the differences between two versions of the page.

--- tools:powder_coating:small_oven [2023/09/24 16:01] – removed - external edit (Unknown date) 127.0.0.1
+++ tools:powder_coating:small_oven [2023/09/24 16:01] (current) – ↷ Page moved and renamed from tools:finishing_small_oven to tools:powder_coating:small_oven smartin015
@@ Line 1: / Line 1: @@
+====== Small Powder Coating Oven (Incomplete -needs powder coating specific info) ======
+  * Model: [[https://www.jegs.com/i/JEGS/555/81430/10002/-1|Bench Top Powder Coating Oven]]
+  * Manufacturer: [[https://www.jegs.com/|Jegs]]
+  * Manual: [[https://www.jegs.com/InstallationInstructions/500/555/555-81430.pdf|Download]]
+The small powder coating oven should be used for any powder coating job that will fit, to avoid firing up the large oven unnecessarily.
+The [[#tool-safety|Tool Safety]], [[#tool-care|Tool Care]], [[#operation|Operation]], section of
+this guide are what instructors use to ensure that you can use the equipment according to community
+expectations.
+====== Requirements ======
+[[https://www.protohaven.org|Powdercoating]] clearance or class equivalent is required before use.
+====== Warnings ======
+🚫 Do not do this
+⚠️ Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning.\\
+⚠️ To disconnect, turn the control to OFF before removing the plug. Always hold the plug, but never pull the cord.\\
+See the [[#tool-safety|Safety Section]] for more information.
+====== Tool Anatomy ======
+{{:tools:smalloven.png?400|}}
+  - Thermostat dial
+  - Selector dial
+  - Indicator light
+  - Timer dial
+  - Glass door
+  - Bake tray
+  - Wire rack
+  - Bake tray handle
+For more visit the manufacturers website and user manual both linked at the top of this document.
+====== Tool Safety ======
+⚠️ Always wear protective insulated oven gloves when inserting or removing items from the hot oven.\\
+====== Tool Care ======
+===== Cleaning =====
+  * Unplug the appliance and allow to cool before cleaning.
+  * Clean appliance interior with a damp cloth.
+  * The crumb tray can be removed for easier cleaning by pulling out from the front under the door.
+  * To clean the appliance, wipe with soft cloth or sponge dipped in neutral cleaning solution.
+🚫 Do not use a hard brush or abrasive cleaners like thinner or solvent.
+===== Inspection =====
+Before you start using the oven you are expected to do an initial inspection and assess its readiness for use.\\
+  * Ensure that there is enough ventilation around the oven (at least four inches of space on all sides).
+  * Ensure that the oven is completely dry before use.
+===== Operation =====
+  * Turn the thermostat dial clockwise to the desired temperature.
+  * Turn the selector dial to the desired position.
+  * Turn the timer dial clockwise to the desired cooking time.
+  * The indicate light will light up until the desired temperature is reached.
+  * When the cooking procedure is done, turn the timer back to turn off the oven.
+==AFTER USE==
+  * Turn off the oven to allow it to cool off.
+  * Set the selector dial to off position.
+  * Unplug the appliance from the outlet.
+==== Maintenance Requests ====
+If you encounter any of the issues listed in the Inspection area or have any other
+issues with the printer not working properly
+  * Update the physical Maintenance Tag at the machine
+    * 🟢Green can be used without issue
+    * 🟡Yellow can be used withcaution
+    * ⛔Red cannot be used without hazard to either the user or the equipment
+  * Record issues at [[https://protohaven.org/maintenance|protohaven.org/maintenance]]. This notifies our staff and volunteer maintenance crew of any issues.
+===== Troubleshooting =====
+==== Problem 1  ====
+lipsum sorem.
+===== Additional Resources =====
+  * [[https://example.com|Link]]
+====== Staff Use ======
+|⚠️ AUTHORIZED MAINTENANCE GROUP ONLY|
+If you are part of the maintenance group please log on to the #maintenance channel of our Discord server to:
+  * Perform a Maintenance Action
+  * Request a Maintenance Purchase
+  * Review complete Maintenance Logs for each machine
+  * Generally chit-chat about maintenance
+===  ===
+===== Tools =====
+The following should be in a Maintenance tool kit for the....
+  * item1
+  * item2
+===== Regular Maintenance =====