Differences

This shows you the differences between two versions of the page.

--- tools:laser_rabbit:clearance [2023/09/24 16:45] – removed - external edit (Unknown date) 127.0.0.1
+++ tools:laser_rabbit:clearance [2024/02/08 00:12] (current) – smartin015
@@ Line 1: / Line 1: @@
+====== Rabbit Laser Clearance ======
+{{section>tools:clearance_template&noheader&nofooter}}
+====== Tool Specific Instruction ======
+===== Point out the following tool features =====
+  * Maintenance Tag
+  * E-Stop
+  * Chiller and it's power switch
+  * Blower
+  * Air Assist compressor
+  * Nozzle
+  * Lens and Mirrors
+===== Identify & mitigate common hazards =====
+  * Fire
+  * Smoke
+===== Allowable Materials =====
+  * Can name three or more materials allowed on the laser.
+  * Can name materials that are not allowed on the laser.
+===== Safe Setup/Operation/Cleanup =====
+  * Demonstrate proper focusing
+  * Demonstrate proper workpiece fixturing
+  * Demonstrate proper determination of power and speed setting for cutting and for engraving each:  1/8" plywood, 1/4" plywood, and 3mm acrylic.
+  * Demonstrate knowledgeable use of the Lightburn software to engrave a rectangle with their name engraved on it.
+  * Demonstrate proper cleanup
+===== Knowledge and Technique =====
+  * Knows and is able to describe proper handling of fire
+  * Knows and is able to describe proper determination of allowed and prohibited materials
+  * Knows and is able to describe proper safety requirements when machine is in operation.