Differences

This shows you the differences between two versions of the page.

--- tools:imported:einscan-se_3d_scanner_tool_tutorial [2023/04/11 20:42] – [Einscan SE 3D Scanner Tool Tutorial] cookienoyousei
+++ tools:imported:einscan-se_3d_scanner_tool_tutorial [2023/09/24 19:34] (current) – removed smartin015
@@ Line 1: / Line 1: @@
-====== Einscan SE 3D Scanner Tool Tutorial (Incomplete) ======
-  * Model: [[https://www.einscan.com/desktop-3d-scanner&sa=D&source=editors&ust=1676742585094481&usg=AOvVaw2AD1gwq3xI6eMlf3nPxjCF|Einscan SE]]
-  * Manufacturer: [[https://www.shining3d.com/&sa=D&source=editors&ust=1676742585094803&usg=AOvVaw271lgZrSmJxuojWCSYTOgO|Shining 3D]]
-  * Documentation:  [[https://www.einscan.com/wp-content/uploads/2020/05/EinScan-SE-Guidebook.pdf|Guidebook]], [[https://drive.google.com/file/d/1MkdP8NkgIXij3wdXv-3_E4V3sJSgWxGt|Manual]]
-====== Prerequisites ======
-No clearances required.   Familiarity with object meshes and 3D modeling is helpful.
-====== Warnings ======
-⚠️ The software for the scanner freezes or crashes frequently.  Be prepared to deal with its quirks.
-----
-====== Tool Anatomy ======
-Assembled view:
-{{tools:einscan-se_3d_scanner_tool_tutorial_image1.png}}
-Exploded View, shows calibration card and power supply:
-{{tools:einscan-se_3d_scanner_tool_tutorial_image2.png}}
-  * Camera Module
-  * Turntable
-  * Calibration Card
-  * Power Supply
-  * USB Cable.
-  * Power Button on back of camera module
-====== Tool Safety ======
-This tool can’t hurt you aside from the software sapping your willl to live with how bad it is.
-====== Tool Care ======
-===== Inspection =====
-Check the Connections for the Power supply, USB, and Turntable are all firmly attached.
-===== Cleaning =====
-Use a lint free cloth to dust the camera module before use if you notice that dust has built up.
-Occasionally dust the turntable.
-==== Maintenance Requests ====
-If you encounter any of the issues listed in the Inspection area or have any other issues with the tool not working properly:
-  * Update the physical Maintenance Tag at the machine
-    * 🟢Green can be used without issue
-    * 🟡Yellow can be used withcaution
-    * ⛔Red cannot be used without hazard to either the user or the equipment
-  * Record issues at [[https://protohaven.org/maintenance|protohaven.org/maintenance]]. This notifies our staff and volunteer maintenance crew of any issues.
-====== Scanner Operation ======
-It's pretty easy to figure out once you are in the software when it’s working.  There are a lot of settings to tweak so be sure to Check out the Manual linked at the top of the document
-Note that the PC connected to the scanner has less ram and a lower video card than the software recommends.
-TODO
-===== Additional Resources =====
-[[https://www.google.com/url?q=https://peel-3d.com/blogs/news/when-and-why-should-i-use-spray-powder-for-3d-scanning&sa=D&source=editors&ust=1676742585101602&usg=AOvVaw297eHSxp2LQdH9oLFef_Mn|Sublimating powder for better scanning]]
-====== Staff Use ======
-|⚠️ AUTHORIZED MAINTENANCE GROUP ONLY\\ \\ |
-If you are part of the maintenance group please log on to the #maintenance channel of our Discord server to:
-  * Perform a Maintenance Action
-  * Request a Maintenance Purchase
-  * Review complete Maintenance Logs for each machine
-  * Generally chit-chat about maintenance
-===  ===
-===== Tools =====
-The following should be in a Maintenance tool kit for the scanner
-===== Regular Maintenance =====
-==== Dust the Scanner ====
-==== Update the Software ====
-=== System Requirements ===
-  * Core i5 3rd Gen
-  * 16GB Ram
-  * GPU Nvidia 660 2GB Video Ram
-Recommended system
-  * Core i7 8700
-  * 32GB Ram
-  * GPU Nvidia GTX1060 4GB Video Ram
-Occasionally we should update the