Differences

This shows you the differences between two versions of the page.

--- tools:cnc_router:start [2023/10/06 18:53] – smartin015
+++ tools:cnc_router:start [2024/12/28 18:02] (current) – [Inspect Motion Systems of the Router] airtable -> http://protohaven.org/maintenance kathryn.mazaitis
@@ Line 327: / Line 327: @@
 Here you will want to inspect all of the tracks, rails, pinions, belts, and cable chains for the machine and to make sure they are unobstructed,  that the machine will be able to move freely and safely.
-Also check that there is a noticeable film of grease on the rails.  If not a [[https://airtable.com/shrluff2WSzy8c3xd|maintenance request]] should be made.
+Also check that there is a noticeable film of grease on the rails.  If not a [[http://protohaven.org/maintenance|maintenance request]] should be made.
 ====Check Dust Collector Bag====