Differences

This shows you the differences between two versions of the page.

--- tools:router_table:clearance [2024/05/14 19:20] – [Point out the following tool features] workshop
+++ tools:router_table:clearance [2024/05/14 19:22] (current) – [Identify & mitigate common hazards] workshop
@@ Line 21: / Line 21: @@
 . Power Cord : ensure this is off while performing maintenance or adjustments.
 ===== Identify & mitigate common hazards =====
+⚠️ Always wear safety goggles and hearing protection when operating the router table.
-TODO
+⚠️ Keep loose clothing, jewelry, and long hair away from the router bit and moving parts.
+⚠️ Ensure that the router bit is securely fastened before starting the machine.
+⚠️ Keep the workspace well-lit to enhance visibility and reduce the risk of accidents.
+⚠️ Disconnect the router table from power before changing router bits or performing maintenance.
+⚠️ Maintain a firm grip on the work piece and use push blocks or sticks to keep your hands safe from the router bit.
+🚫 Avoid distractions while using the router table to maintain focus on the task.
+🚫 Do not remove debris or adjust the router table while it is in motion.
+🚫 Do not overload the router with excessive feed pressure; let the tool work at its own pace.
+⚠️ Use a router table fence or guide to ensure consistent and controlled cuts.
+🚫 Avoid freehand routing without proper guides or jigs, as it increases the risk of slips and injuries.
+⚠️ Double-check the depth settings before making a cut to prevent the router bit from cutting too deep.
+⚠️ Work in a clutter-free environment to avoid tripping hazards and ensure freedom of movement.
+🚫 Never reach over or behind the router table while it's running; turn off the power and wait for all moving parts to stop.
+⚠️ Read and understand the router table's manual and safety guidelines before operation.
+⚠️ In case of any unfamiliar noises, vibrations, or irregularities, turn off the router table and inspect the issue before continuing.
+🚫 Do not rush tasks; take your time to ensure accurate cuts and reduce the risk of accidents.
+See the Safety Section for more information.
 ===== Allowable Materials =====