Differences

This shows you the differences between two versions of the page.

--- tools:powder_coating:clearance [2023/11/24 15:58] – smartin015
+++ tools:powder_coating:clearance [2024/02/09 13:57] (current) – smartin015
@@ Line 1: / Line 1: @@
-====== Powder Coating & Sandblasting Proficiency Based Clearance======
+====== Powder Coating Clearance ======
 {{section>tools:clearance_template&noheader&nofooter}}
@@ Line 22: / Line 22: @@
 ===== Powder Coating Oven: Point out the following tool features =====
   * Maintenance Tag
   * E-Stop
@@ Line 28: / Line 29: @@
   * Saddle/Carriage
   * Carriage Handwheel
-===== Sandblasting Cabinet: Point out the following tool features =====
-  * Maintenance Tag
-  * E-Stop
-  * Power Switch
-  * Viewport & Protective Film
-  * Siphon Hose
-  * Air Hose
-  * Blasting Gun
-  * Foot Pedal
-  * Screen Filter
-  * Media Hopper
-  * Gauntlet Gloves
-  * Dust Collector
 ===== Identify & mitigate common hazards =====
-  * Dust - latch doors, wear appropriate dust mask/respirator,vacuum debris (don’t sweep) with dust collection engaged
-  * Abrasive Damage - Do not point blasting gun at cabinet, viewport or gloves
   * Burns - use appropriate gloves at oven, ensure proper work-holding with heated material
-===== Allowable Materials =====
-  * Can name two types of material that are prohibited for use at the sandblasting cabinet
 ===== Safe Setup/Operation/Cleanup =====
-===== Sandblasting Cabinet =====
-  * Demonstrates proper removal of oil & moisture in preparation for sandblasting
-  * Demonstrates proper work-holding
-  * Demonstrates proper door closure
 ===== Powder Coating Booth =====
   * Demonstrates proper grounding
   * Demonstrates adjustment for conservative powder feed