Differences

This shows you the differences between two versions of the page.

--- tools:powder_coating:clearance [2023/11/23 18:32] – ↷ Page name changed from tools:powder_coating:clearance_plus_sandblasting to tools:powder_coating:clearance smartin015
+++ tools:powder_coating:clearance [2024/02/09 13:57] (current) – smartin015
@@ Line 1: / Line 1: @@
-===== Powder Coating & Sandblasting Proficiency Based Clearance=====
+====== Powder Coating Clearance ======
-Members who are already proficient in the subject matter may apply to receive a clearance by demonstrating a
-core set of skills and knowledge that allow them to safely and effectively use the equipment.
-> Most tools in the shop require clearance before solo use. Each tool is different and most are expensive and/or delicate.
+{{section>tools:clearance_template&noheader&nofooter}}
-During a Proficiency Based Clearance Instructors will provide Protohaven specific customs and rules for the
+====== Tool Specific Instruction ======
-equipment but will not provide technical instruction on the operation of the hardware, or software.
-If a member needs to gain additional knowledge or skill they should take a Basic Skills Class to learn the
-required skills.
-The items that will need to be demonstrated to gain the Proficiency Based Clearance are:
-===== General Shop Rules  =====
-==== Be safe ====
-  * Understands safety clearances are required as bare minimum.
-  * Understands equipment must never be left unattended.
-  * Understands why equipment must be reset after use.
-==== Take care of the tools ====
-  * Will not alter or use equipment beyond limits.
-  * Will notify when maintenance is needed.
-==== Keep the shop clean ====
-  * Understands importance of cleaning up after oneself.
-  * Will return borrowed tools to original location.
-  * Understands anything left outside of your paid monthly or overnight storage may be removed and disposed.
-===== Personal Protective Equipment =====
-  * Knows whether long sleeves can be worn beyond elbows during operation of equipment.
-  * Knows whether loose clothing & hair may be worn down .
-  * Knows whether open-toed shoes may be worn.
-  * Knows whether safety glasses and hearing protection are required during operation.
-  * Knows whether safety glasses are required when near someone else operating equipment in the workshop.
 ===== Powder Coating Booth: Point out the following tool features =====
@@ Line 58: / Line 22: @@
 ===== Powder Coating Oven: Point out the following tool features =====
   * Maintenance Tag
   * E-Stop
@@ Line 64: / Line 29: @@
   * Saddle/Carriage
   * Carriage Handwheel
-===== Sandblasting Cabinet: Point out the following tool features =====
-  * Maintenance Tag
-  * E-Stop
-  * Power Switch
-  * Viewport & Protective Film
-  * Siphon Hose
-  * Air Hose
-  * Blasting Gun
-  * Foot Pedal
-  * Screen Filter
-  * Media Hopper
-  * Gauntlet Gloves
-  * Dust Collector
 ===== Identify & mitigate common hazards =====
-  * Dust - latch doors, wear appropriate dust mask/respirator,vacuum debris (don’t sweep) with dust collection engaged
-  * Abrasive Damage - Do not point blasting gun at cabinet, viewport or gloves
   * Burns - use appropriate gloves at oven, ensure proper work-holding with heated material
-===== Allowable Materials =====
-  * Can name two types of material that are prohibited for use at the sandblasting cabinet
 ===== Safe Setup/Operation/Cleanup =====
-===== Sandblasting Cabinet =====
-  * Demonstrates proper removal of oil & moisture in preparation for sandblasting
-  * Demonstrates proper work-holding
-  * Demonstrates proper door closure
 ===== Powder Coating Booth =====
   * Demonstrates proper grounding
   * Demonstrates adjustment for conservative powder feed