Differences

This shows you the differences between two versions of the page.

--- tools:powder_coating:clearance [2023/11/23 18:32] – removed - external edit (Unknown date) 127.0.0.1
+++ tools:powder_coating:clearance [2024/02/09 13:57] (current) – smartin015
@@ Line 1: / Line 1: @@
+====== Powder Coating Clearance ======
+{{section>tools:clearance_template&noheader&nofooter}}
+====== Tool Specific Instruction ======
+===== Powder Coating Booth: Point out the following tool features =====
+  * Maintenance Tag
+  * Ventilation
+  * Spray Gun
+  * Ground Cable
+  * Powder Hopper
+  * Spray Electrode
+  * Feed Air Regulator
+  * Feed Air Gauge
+  * Voltage Adjustment Knob
+  * Gun Voltage & Current Indicator
+  * Main Power Switch
+  * Spray Gun Cable Connector
+  * Supply Air Hose
+===== Powder Coating Oven: Point out the following tool features =====
+  * Maintenance Tag
+  * E-Stop
+  * Power Switch
+  * Heating elements
+  * Saddle/Carriage
+  * Carriage Handwheel
+===== Identify & mitigate common hazards =====
+  * Burns - use appropriate gloves at oven, ensure proper work-holding with heated material
+===== Safe Setup/Operation/Cleanup =====
+===== Powder Coating Booth =====
+  * Demonstrates proper grounding
+  * Demonstrates adjustment for conservative powder feed
+  * Demonstrates meticulous clean-up of hopper, feed lines, and spray gun using air, ventilation, and denatured alcohol on a CLEAN microfiber towel
+===== Powder Coating Oven =====
+  * Demonstrates proper temperature cycle setup
+  * Demonstrates understanding of e-stop versus soft stop
+===== Knowledge and Technique =====
+  * Knows how and when to back-purge the siphon hose
+  * Understands timeframe to preheat powder coating oven