Protohaven Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Hand Notcher Clearance (DRAFT) ======

{{section>tools:clearance_template&noheader&nofooter}}

====== Tool Specific Instruction ======

===== Point out the following tool features =====

TODO

===== Identify & mitigate common hazards =====

TODO

===== Allowable Materials =====

TODO

===== Safe Setup/Operation/Cleanup =====

TODO

===== Knowledge and Technique =====

TODO

===== Notes =====

  * Can use the hold downs to brace the sheet
  * Upgrades
  * Thumb/hand wheel for tightening the hold downs, plus a way to keep the bottom of the bolt from turning
  * Pull handle down, chunks the metal
  * Clean up underneath after
  * Upgrades
  * Find matching wing nuts for hold replacement down screws on notcher
  * Maintenance
  * Verify the shafts for the cam section are in place and not slipping out; add some ways oil