Protohaven Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Laser Clearance (Trotec) ======

{{section>tools:clearance_template&noheader&nofooter}}

====== Tool Specific Instruction ======

===== Point out the following tool features =====

  * Maintenance Tag
  * E-Stop
  * Lid
  * Exhaust
  * Lens carriage
  * Cutting bed
  * Power switch
  * Shop-Vac vacuum
  * Computer station
  * Prohibited materials list
  * Permitted materials list
  * Hold down tools

===== Identify & mitigate common hazards =====

  * Fire & smoke - stay vigilant (listen/smell test), don’t leave machine unattended, avoid prohibited materials, use proper settings
  * Toxic fumes - avoid prohibited materials
  * Lens carriage collision - use proper workholding with flat material


===== Allowable Materials =====

  * Can name one common material that is safe for use
  * Can name two types of material that are prohibited for use
===== Safe Setup/Operation/Cleanup =====
 
  * Demonstrates proper workholding of material in laser tray
  * Demonstrates turning on the exhaust manually before sending job to laser cutter
  * Demonstrates execution of a job with cutting & engraving
  * Demonstrates cleaning the laser cutter

===== Knowledge and Technique =====
 
  * Demonstrates proper origin set up in Trotec Job Control software
  * Demonstrates proper file set up for Trotec Job Control