Differences

This shows you the differences between two versions of the page.

--- tools:jewelry:clearance_kiln [2023/09/24 19:17] – removed - external edit (Unknown date) 127.0.0.1
+++ tools:jewelry:clearance_kiln [2024/02/07 23:31] (current) – smartin015
@@ Line 1: / Line 1: @@
+====== Jewelry Kiln Clearance ======
+{{section>tools:clearance_template&noheader&nofooter}}
+====== Tool Specific Instruction ======
+===== Jewelry Kiln: Point out the following tool features =====
+  * Maintenance tag
+  * Power switch
+  * Temperature controller
+  * Top vent
+  * Door latches
+  * Thermocouple
+  * Heating coils
+  * Viewport
+===== Identify & mitigate common hazards =====
+  * Burns - use appropriate gloves and heat-safe tools at kiln.
+===== Allowable Materials =====
+  * Can name two types of material that are prohibited for use inside the kiln
+  * Can name two types of material that are allowed for use inside the kiln
+===== Safe Setup/Operation/Cleanup =====
+  * Demonstrates powering on the machine and loading/unloading material
+  * Demonstrates programming and starting a kiln schedule with a ramp up, soak, and ramp down.
+  * Demonstrates reading the current and set point temperatures
+  * Demonstrates stopping a running kiln schedule
+===== Knowledge and Technique =====
+  * Understands the maximum temperature the kiln is rated for
+  * Understands how to keep their part and any coatings off the interior of the kiln
+  * Understands how the programmed time value affects the ramp speed between temperatures
+  * Understands when the temperature deviation alarm fires and how it affects the firing schedule
+  * Understands how to use the stop code (-121) when programming a firing schedule
+  * Understands what to do if smoke is observed coming from the kiln