Protohaven Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Jewelry Area Clearance ======

{{section>tools:clearance_template&noheader&nofooter}}

====== Tool Specific Instruction ======

===== Point out the following tool features =====

  * Maintenance Tag
  * Gas and Oxygen Open/Shut-off Valve for Torch
  * Adjust Pressure Regulator
  * Tank Amount Gauges 
  * Flux, Firescale Protection Solution
  * Soldering Pad
  * Tumbler and Where Tumbler Canister is Stored and Solution
  * Pickle and Solution
  * Pickle Neutralizer and Changing the Solution
  * Ultrasonic and Solution
  * Polishing Machine
  * Buffs
  * Polishing Compounds
  * Hammers and Mallets
  * FlexShaft and Attachments 
  * Hand Tools: pliers, cutters, files, needle files, etc
  * Saw and Load New Blade
  * Dapping Punch
  * Disc Cutter

===== Identify & mitigate common hazards =====

  * Fire/Gas Leak - stay vigilant (listen/smell test)
  * Toxic Fumes - use vent hood


===== Allowable Materials =====

  * Identify which metal is allowable in which pickle 
===== Safe Setup/Operation/Cleanup =====
 
  * Demonstrates clearing the work area before use 
  * Demonstrates use of ventilation fan
  * Demonstrates proper PSI regulation 
  * Demonstrates gas leak vigilance 
  * Demonstrates proper torch ignition 
  * Demonstrates secure workholding of hot material 
  * Demonstrates safe quenching/pickling techniques 
  * Demonstrates safe shut down of torch 
  * Demonstrates proper cleaning of metal dust from floor and catch trays into the Shop-Vac


===== Knowledge and Technique =====
 
  * Knows the likely reason for flame to go out on the torch