Protohaven Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Metal Chop Saw Clearance ======

{{section>tools:clearance_template&noheader&nofooter}}

{{section>tools:general_metals:clearance_area&nofooter&noindent}}

====== Tool Specific Instruction ======

===== Point out the following tool features =====


  * Maintenance tag
  * Power switch
  * Clamping blocks
  * Clamp angle adjust lever
  * Clamp wheel
  * Clamping guide poster

===== Safe Setup/Operation/Cleanup =====

  * Demonstrate proper stock clamping and positioning of the blade for a straight cut
  * Demonstrate performing a straight cut
  * Demonstrate proper clamping of stock material for an angled cut
  * Demonstrate performing an angled cut 

===== Knowledge and Technique =====

  * Can describe proper workholding technique to prevent metal from getting caught and thrown
  * Acknowledges the risk of serious injury by deviating from the recommendations in the clamping guide poster.