Protohaven Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Bench Power Supply Clearance (STUB) ======

{{section>tools:clearance_template&noheader&nofooter}}

====== Tool Specific Instruction ======

===== Point out the following tool features =====

  * Bench power switch (turns on all electronics at the bench)
  * Supply power switch
  * Earth ground terminals (channels 1 & 2)
  * Common / negative terminal (channels 1 & 2)
  * Voltage supply terminals (channels 1 & 2)
  * 5V 3A fixed supply and common/ground terminals
  * Mode switches (independent/series/parallel)
  * Volt & amp displays & selectors


===== Identify & mitigate common hazards =====

TODO

===== Allowable Materials =====

TODO

===== Safe Setup/Operation/Cleanup =====

  * Demonstrates switching display mode (volts vs amps)
  * Demonstrates 

===== Knowledge and Technique =====

  * Understands when independent, series, and parallel modes should be used
  * Understands when the earth ground on the power supply would be used, vs the negative (common) line