====== Wood Lathe Clearance ======

{{section>tools:clearance_template&noheader&nofooter}}

====== Tool Specific Instruction ======

===== Point out the following tool features =====

  * Maintenance Tag
  * E-Stop
  * Spindle on/off
  * Spindle direction control
  * Spindle speed controls
  * Headstock
  * Bed and ways
  * Tool rest lock & rotation handles/nuts
  * Travel locks and limits
  * Tailstock handle, locks
  * Chuck, chuck jaws, chuck tommy bars

===== Identify & mitigate common hazards =====

  * Heavy things - chucks & workpieces
  * Sharp things - cutting tools, chips
  * Spinning things - chuck jaws, work piece
  * Danger zones – flying things

===== Allowable Materials =====

  * Can name three materials allowed on the lathe (wood, acrylic, resin)
  * Can name materials that are not allowed on the lathe

===== Safe Setup/Operation/Cleanup =====

  * Demonstrates proper removal and mounting of chuck (cleans nose, correct force)
  * Demonstrates proper work-holding in 4 jaw chuck
  * Demonstrates proper speed selection
  * Demonstrates proper cutting tool selection
  * Demonstrates proper mounting of tool in tool rest
  * Demonstrates turning and facing
  * Demonstrates center drilling with tailstock
  * Demonstrates cleaning the lathe

===== Knowledge and Technique =====
 
  * Knows how to turn between centers
  * Knows use of turning, facing, and tools, correct orientation.
  * Know the difference between roughing, finishing, detailing, and parting tools.