====== Small Powder Coating Oven (Incomplete -needs powder coating specific info) ======

  * Model: [[https://www.jegs.com/i/JEGS/555/81430/10002/-1|Bench Top Powder Coating Oven]]
  * Manufacturer: [[https://www.jegs.com/|Jegs]]
  * Manual: [[https://www.jegs.com/InstallationInstructions/500/555/555-81430.pdf|Download]]

The small powder coating oven should be used for any powder coating job that will fit, to avoid firing up the large oven unnecessarily.

The [[#tool-safety|Tool Safety]], [[#tool-care|Tool Care]], [[#operation|Operation]], section of 
this guide are what instructors use to ensure that you can use the equipment according to community 
expectations.

====== Requirements ======

[[https://www.protohaven.org|Powdercoating]] clearance or class equivalent is required before use.

====== Warnings ======

🚫 Do not do this

⚠️ Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning.\\
⚠️ To disconnect, turn the control to OFF before removing the plug. Always hold the plug, but never pull the cord.\\



See the [[#tool-safety|Safety Section]] for more information.

====== Tool Anatomy ======

{{:tools:smalloven.png?400|}}
  - Thermostat dial
  - Selector dial
  - Indicator light
  - Timer dial
  - Glass door
  - Bake tray
  - Wire rack
  - Bake tray handle

For more visit the manufacturers website and user manual both linked at the top of this document.

====== Tool Safety ======

⚠️ Always wear protective insulated oven gloves when inserting or removing items from the hot oven.\\

====== Tool Care ======

===== Cleaning =====
  * Unplug the appliance and allow to cool before cleaning.
  * Clean appliance interior with a damp cloth.
  * The crumb tray can be removed for easier cleaning by pulling out from the front under the door.
  * To clean the appliance, wipe with soft cloth or sponge dipped in neutral cleaning solution. 
🚫 Do not use a hard brush or abrasive cleaners like thinner or solvent.


===== Inspection =====

Before you start using the oven you are expected to do an initial inspection and assess its readiness for use.\\
  * Ensure that there is enough ventilation around the oven (at least four inches of space on all sides).
  * Ensure that the oven is completely dry before use.

===== Operation =====
  * Turn the thermostat dial clockwise to the desired temperature.
  * Turn the selector dial to the desired position.
  * Turn the timer dial clockwise to the desired cooking time.
  * The indicate light will light up until the desired temperature is reached.
  * When the cooking procedure is done, turn the timer back to turn off the oven.
==AFTER USE==
  * Turn off the oven to allow it to cool off.
  * Set the selector dial to off position.
  * Unplug the appliance from the outlet.


==== Maintenance Requests ====
If you encounter any of the issues listed in the Inspection area or have any other 
issues with the printer not working properly

  * Update the physical Maintenance Tag at the machine
    * 🟢Green can be used without issue
    * 🟡Yellow can be used withcaution
    * ⛔Red cannot be used without hazard to either the user or the equipment
  * Record issues at [[https://protohaven.org/maintenance|protohaven.org/maintenance]]. This notifies our staff and volunteer maintenance crew of any issues.



===== Troubleshooting =====

==== Problem 1  ====

lipsum sorem.



===== Additional Resources =====


  * [[https://example.com|Link]]


====== Staff Use ======

|⚠️ AUTHORIZED MAINTENANCE GROUP ONLY|

If you are part of the maintenance group please log on to the #maintenance channel of our Discord server to:


  * Perform a Maintenance Action
  * Request a Maintenance Purchase
  * Review complete Maintenance Logs for each machine
  * Generally chit-chat about maintenance


===  ===

===== Tools =====

The following should be in a Maintenance tool kit for the....


  * item1
  * item2


===== Regular Maintenance =====