====== Powder Coating Clearance ======

{{section>tools:clearance_template&noheader&nofooter}}

====== Tool Specific Instruction ======

===== Powder Coating Booth: Point out the following tool features =====

  * Maintenance Tag
  * Ventilation
  * Spray Gun
  * Ground Cable
  * Powder Hopper
  * Spray Electrode
  * Feed Air Regulator
  * Feed Air Gauge
  * Voltage Adjustment Knob
  * Gun Voltage & Current Indicator
  * Main Power Switch
  * Spray Gun Cable Connector
  * Supply Air Hose

===== Powder Coating Oven: Point out the following tool features =====

  * Maintenance Tag
  * E-Stop
  * Power Switch
  * Heating elements
  * Saddle/Carriage
  * Carriage Handwheel

===== Identify & mitigate common hazards =====

  * Burns - use appropriate gloves at oven, ensure proper work-holding with heated material 

===== Safe Setup/Operation/Cleanup =====

===== Powder Coating Booth =====

  * Demonstrates proper grounding 
  * Demonstrates adjustment for conservative powder feed 
  * Demonstrates meticulous clean-up of hopper, feed lines, and spray gun using air, ventilation, and denatured alcohol on a CLEAN microfiber towel 

===== Powder Coating Oven =====
  * Demonstrates proper temperature cycle setup
  * Demonstrates understanding of e-stop versus soft stop 


===== Knowledge and Technique =====
 
  * Knows how and when to back-purge the siphon hose 
  * Understands timeframe to preheat powder coating oven