====== Magnetic Tumbler (Incomplete) ======
  * Model: [[..:imported:start|Huajie KD-100]]
  * Manufacturer: [[..:imported:start|Huajie]]
  * Manual: [[..:imported:start|Download]]

The magnetic tumbler uses tiny metal pins driven by a powerful rotating magnet to polish and work-harden pieces.

The [[#tool-safety|Tool Safety]], [[#tool-care|Tool Care]], [[#operation|Operation]], section of 
this guide are what instructors use to ensure that you can use the equipment according to community 
expectations.
====== Requirements ======

Jewelry clearance is required.

====== Warnings ======
🚫 Do not 
⚠️ Warning

See the [[#tool-safety|Safety Section]] for more information.

====== Tool Anatomy ======
{{:tools:imported:tumbler.png?400|}}

====== Tool Safety ======

==== Personal Protective Equipment ====

⚠️ Safety glasses

==== Common Hazards ====


==== Prohibited Materials ====

====== Tool Care ======

==== Inspection ====

====== Operation ======
====Set Up====


**Tumbler** 

  * Do not store the tumbler canister on the tumbler. This causes the steel burnishing shot to become highly magnetized and not work as well. Please store it on the table! 
  * Always store the canister with the lid on and shot fully immersed, otherwise the steel shot will rust.
It rotates in one direction for about 15 minutes, and then automatically rotates to the opposite direction for 15 minutes. We suggest a two-way rotation, which is more efficient.

After selecting the direction you want, press the button in the center, then tumbler started to work.

You can choose a specific time by turning the time control button.

Tum Tumbler has self-protection function. When it works for a long time, it will stop and rest. When the motor is cooled down, it will continue to work. 

**Pickle Pot**

  * Only use copper tongs in pickle solution, never steel!
  * Neutralize pickle solution in the sink by pouring it into a bowl of 1/4 baking soda and 3/4 water mixture. 
  * Unplug before leaving the studio! 
  * Silver work should not be used in a pickle pot where copper/bronze/brass work is pickled, otherwise it will become copper plated. Neutralize and make fresh pickle if this is the case.

**Buffs**
Buffs should not be gummed up with polishing compound! Use compound sparingly so the buffs stay fluffy.


===Consumables===

==== Maintenance Requests ====
If you encounter any of the issues listed in the Inspection area or have any other issues with the tool not working properly:

  * Update the physical Maintenance Tag at the machine
    * 🟢Green can be used without issue
    * 🟡Yellow can be used with caution
    * ⛔Red cannot be used without hazard to either the user or the equipment
  * Record issues at [[https://protohaven.org/maintenance|https://protohaven.org/maintenance]]. This notifies our staff and volunteer maintenance crew of any issues.

===== Troubleshooting =====



^ **Common Issues** ^ **Possible Causes** ^ **Resolutions** ^
|                       |                         |                     |
|                       |                         |                     |
|                       |                         |                     |
|                       |                         |                     |
|                       |                         |                     |








===== Additional Resources =====

Where can one find materials, tools, or other consumables (either local or online vendors)?
What helpful video tutorials are there where one can dive deeper into operating this tool?







====== Staff Use ======

|⚠️ AUTHORIZED MAINTENANCE GROUP ONLY|

If you are part of the maintenance group please log on to the #maintenance channel of our Discord server to:


  * Perform a Maintenance Action
  * Request a Maintenance Purchase
  * Review complete Maintenance Logs for each machine
  * Generally chit-chat about maintenance


===  ===

===== Tools =====

The following should be in a Maintenance tool kit for the....


  * item1
  * item2


===== Regular Maintenance =====